{"product_id":"ressichem-ressi-ta-300-cold-storage-cold-areas-porcelain-marble-granite-ceramic-glass-tiles-in-pakistan","title":"Ressichem Ressi TA 300  Cold Storage  Cold Areas Porcelain  Marble Granite Ceramic Glass Tiles  in Pakistan","description":"\u003ch2\u003e\u003cstrong\u003eRessichem Ressi TA 300 Cold Storage Cold Areas Porcelain  Marble Granite Ceramic Glass Tiles  in Pakistan\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eRessi TA 300 is a specially designed tile adhesive for the applications at around freezing temperature i.e. cold storage or cold areas where temperature reaches to freezing. \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRessi TA 300 is highly suitable for the bonding of most types of tiles. Ressi TA 300 is highly suitable for the application of porcelain, marble, granite, ceramic, glass tiles and many other different types of tiles in cold areas. Ressi TA 300 can easily be applied using the application spectrum as defined by BS EN 5385-1.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch2\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eAdvantages\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eCrack resistant.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eNon-yellowing mortar.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eDampness resistant.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eFast Cure.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eSalt free mix\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eExcellent workability.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eHigh bond strength.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eSlip resistant.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eQuick Set.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eWaterproof.\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch2\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eAll loose particles and oil shall be cleaned off the surface prior to the application. Application on most type of cementitious surfaces like block work, concrete and rough plastered surfaces is possible. \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe surface should be sufficiently aged (At least 7 days for newly erected masonry surface and freshly plastered surface) before the installation of the tiling may begin. It is also recommended that expansion joints should not be tiled over, and suitable treatment should be done over them. \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eHighly absorbent surfaces should be dampened, before spreading Ressi TA 300. Defective and unsound surfaces should be repaired before the installation of the tiles. It is also important to ensure that there is no dust at the backs of the tile, otherwise it may cause hollow sounds and improper adhesion of the tiles to the substrate.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch2\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eProduct Preparation\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eIt is important that water is premeasured in accordance with the amount of material used. The Mortar powder should be added over the water to avoid the settlement of the material at the bottom of the mixing container. \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe Mixing container should be uncontaminated, non-corrosive and clean. Only potable water should be used for mixing. It is also recommended that the material should be mechanically mixed with a mortar mixer or other mechanical mixing methods to obtain a consistent lump free mix.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch2\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eButtering of the material onto the back of the tiles is usually not recommended as it this may cause poor adhesion. Spread the material evenly onto the surface using a suitable straight edge trowel and then notch immediately. \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eTo ensure good bonding, it is recommended not to spread the material more than 1m2 at a time as the mortar may dry up resulting in poor adhesion and causing difficulties in application. After the application and levelling of the mortar, the tiles should be firmly knocked into the position. Adjustment of the tiles should be done at a maximum of 10 minutes after application.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\n\u003cstrong\u003eAt pakistan power tool keeping the pace of industry developments, we have an extensive range of Ressichem Dry Mix Mortars Premix Plasters Ressichem Building Care Maintenance Tiling Grouting Materials available at best competitive rates in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Quetta, Multan, and all over Pakistan.\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(15, 101, 230);\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Pakistan Power Tool","offers":[{"title":"5 Bags 20 KG","offer_id":47699527925981,"sku":null,"price":30000.0,"currency_code":"PKR","in_stock":true},{"title":"10 Bags 20 KG","offer_id":47699527958749,"sku":null,"price":60000.0,"currency_code":"PKR","in_stock":true},{"title":"20 Bags 20 kg","offer_id":47699527991517,"sku":null,"price":120000.0,"currency_code":"PKR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0663\/1754\/9789\/files\/ta300.png?v=1774517762","url":"https:\/\/www.pakistanpowertool.com\/products\/ressichem-ressi-ta-300-cold-storage-cold-areas-porcelain-marble-granite-ceramic-glass-tiles-in-pakistan","provider":"Pakistan Power Tool ","version":"1.0","type":"link"}