{"product_id":"water-guard-crysta-coat-101-cementitious-slurry-waterproofing-system-by-crystallization-20-kg-in-pakistan","title":"Water Guard Crysta Coat 101 Cementitious Slurry Waterproofing System by Crystallization 20 kg in Pakistan","description":"\u003ch2\u003e\u003cstrong\u003eWater Guard Crysta Coat 101 Cementitious Slurry Waterproofing System by Crystallization 20 kg in Pakistan\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eWater Guard Crysta Coat 101 is a cementitious slurry waterproofing system by crystallization. The active chemicals in the applied Water Guard Crysta Coat 101 reacts with the free lime and moisture present in the capillary track in the concrete to form an insoluble crystalline complex. The crystals block the capillaries and minor shrinkage cracks in the concrete to prevent any further water ingress. \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eWater Guard Crysta Coat 101 can be used for various concrete elements in structures such as marine and costal structures, rafts, precast panels, water storage tanks, highways, runways, roofs decks, bridges. Cut and cover tunnels, silos, carparks, swimming pools, pipes, lift pits etc. it is an ideal replacement for the old tedious and hazardous method of SBS membrane waterproofing membrane systems of basements.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003eAdvantages of \u003c\/span\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003eWater Guard Crysta Coat 101\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cstrong\u003eBecomes an integral part of concrete.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eSuitable for use in contact with potable water.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eChemicals remain dormant and are reactivated whenever there is a presence of moisture.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eDoes not require costly surface priming or levelling prior to application as for other coatings.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eTime saving, fast tracks projects.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCan be applied to freshly laid green concrete by dry shake method.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCan be applied to negative side of water retaining or underground structures.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eForms surface membranes.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eEconomical to apply.\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003ch2\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eConcrete surface to be treated must be clean and free of laitance, dirt films, paint, coatings, or other foreign matter. The surface must also have an open capillary system for the Water Guard Crysta Coat 101 treatment. If the surface is too smooth, they much be acid etched using Ressi Acid itch and then further neutralized. \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eThe surface can also be Lightly sand blasted, or water blasted if not neutralized properly. Structural defects such as cracks, faulty construction joints and honeycombs should be routed to sound concrete and repaired. It is recommended to use Ressichem patch series of repair mortar for these applications. \u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eWater Guard Crysta Coat 101 is not designed for use in expansion joints or “moving cracks.” Horizontal surfaces should preferably have a rough wooden float or broom finish. All surfaces should be saturated with water prior to application.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch2\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eMixing \u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan\u003eThe Water powder ratio of \u003c\/span\u003eWater Guard Crysta Coat 101\u003cspan\u003e is between 0.50 to 0.55. This means for a 2 KG bag the water ratio can vary from 1 Ltr to 1.1 Ltr. And for a 20 KG Bag 10 Ltr to 11 Ltr of water can be used. Only potable water is to be used for mixing. Always add powder to water, mix using a slow speed drill fitted with a paddle until a smooth lump free consistency is obtained. Do not rework stiff material by adding more water. Only mix enough material that can be used within 30 minutes.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch2\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eSlurry coat: Apply water Guard Crysta Coat 101with a stiff fiber brush. Scrub well into the damp surface, filling all pores and finish with final strokes in one direction. After the first coat has been set but while it is still green, apply a second coat. If this is not possible, prewet the first coat before application of the second coat. Application is recommended on concrete that is at least two to four weeks old.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eDry shake method: For newly poured concrete, use Water Guard Crysta Coat 101directly from the bag, distribute the powder evenly over the freshly poured concrete at a spread rate of 4-5 KG \/ m\u003csup\u003e2\u003c\/sup\u003e before the final trowel finish. It is recommended to distribute approximately 50% at right angles to the first application. Release the powder as close to the wet surface of concrete as possible. Finally trowel the concrete to the required finish. For positive side waterproofing, Water Guard Crysta Coat 101 can be sprinkled on horizontal formwork. Concrete should be poured directly on the well spread material.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eLeaking cracks: Water Guard Crysta Coat 101 can be mixed to the dry mortar consistency and used to fill the cracks. If there is any active water leakage, then Water Guard Crysta Coat 101 can be mixed with a suitable plugging material recommended by Ressichem at a Ratio of 1:1 and fixed at the point of water leakage to stop the flow of water. Over such treatment two coats of Water Guard Crysta Coat 101 can be applied at a said rate of application.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 128, 0);\"\u003eCuring\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eApplied Water Guard Crysta Coat 101 should be protected against moisture 4evaporation by sun and wind. Careful fog \/ mist spraying of water should be undertaken to keep the surface damp. Alternatively, the surface can be covered with wet hessian or moist sand. Curing compounds are not recommended.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eMoisture cure Water Guard Crysta Coat 101 treated surfaces 2 to 4 times a day for a period of 12-15 Days. Backfill material can be placed on Water Guard Crysta Coat 101 applications after moisture curing has been completed. No protection boards required.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\n\u003cstrong\u003eAt\u003cspan\u003e pakistan power tool\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ekeeping the pace of industry developments, we have an extensive range of Ressichem Dry Mix Mortars Premix Plasters Ressichem Building Care Maintenance Tiling Grouting Materials available at best competitive rates in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Quetta, Multan, and all over Pakistan.\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(15, 101, 230);\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e","brand":"Pakistan Power Tool","offers":[{"title":"Default Title","offer_id":47826297716957,"sku":null,"price":60000.0,"currency_code":"PKR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0663\/1754\/9789\/files\/water-guard-crysta-coat-101-printed.png?v=1776688678","url":"https:\/\/www.pakistanpowertool.com\/products\/water-guard-crysta-coat-101-cementitious-slurry-waterproofing-system-by-crystallization-20-kg-in-pakistan","provider":"Pakistan Power Tool ","version":"1.0","type":"link"}