Ressichem Zepoxy 350 Clear Epoxy High Gloss Epoxy Higher Clarity in Pakistan

Ressichem Zepoxy 350  Clear Epoxy High Gloss Epoxy Higher Clarity in Pakistan

Packing 

1.5 KG Sets                   

Part A 1 KG
Part B 500g

Zepoxy 350 is a clear epoxy system, which offers a longer open time, lower viscosity, higher gloss, higher clarity, superior wetting, and superior impact strength compared to standard market coating grades like Zepoxy 300. These properties make coatings or castings done with Zepoxy 350 superior in all aspects.

Zepoxy 350 is a clear epoxy system, which offers a longer open time, lower viscosity, higher gloss, higher clarity, superior wetting, and superior impact strength compared to standard market coating grades like Zepoxy 300. These properties make coatings or castings done with Zepoxy 350 superior in all aspects.

Note

At 40°C gel time will be reduced to half, in case of increased temperatures, pouring should be planned accordingly.

Mixing 

The mixing ratio must be accurately followed to achieve perfect results. It is not possible to change the ratio which would result in the epoxy not drying properly and lower mechanical properties. Pour the hardener first and then the resin.

The mixed components should be thoroughly mixed for 3-4 minutes to ensure an even consistency. To avoid development of bubbles slowly mix for 5-10 mins. Once the epoxy is mixed and poured gently pass warm air from a heat gun or hair dryer on slowest speed setting, this will assist in removal of any bubbles generated during mixing.

At Pakistan Power Tool keeping the pace of industry developments, we have an extensive range of Ressichem Dry Mix Mortars Premix Plasters Ressichem Building Care Maintenance Tiling Grouting Materials available at best competitive rates in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Quetta, Multan, and all over Pakistan.