Zepoxy 300 General Purpose Coatings Clear High Gloss Epoxy in Pakistan

Zepoxy 300 General Purpose Coatings Clear High Gloss Epoxy in Pakistan

Packing 

Full Set 1.5 KG                     

Part A 1 KG
Part B: 500g

Zepoxy 300 is a clear high gloss epoxy system for general purpose coatings and thin castings. This system offers a moderate open time, medium viscosity, good wetting characteristics and good impact strength.

Note

At 40°C gel time will be reduced to half, in case of increased temperatures, pouring should be planned accordingly.

Mixing

The mixing ratio must be accurately followed to achieve perfect results. It is not possible to change the ratio which would result in the epoxy not drying properly and lower mechanical properties. Pour the hardener first and then the resin.

The mixed components should be thoroughly mixed for 3-4 minutes to ensure an even consistency. To avoid the development of bubbles slowly mix for 5-10 mins. Once the epoxy is mixed and poured gently pass warm air from a heat gun or hairdryer on slowest speed setting, this will assist in removal of any bubbles generated during mixing.

At Pakistan Power Tool keeping the pace of industry developments, we have an extensive range of Ressichem Dry Mix Mortars Premix Plasters Ressichem Building Care Maintenance Tiling Grouting Materials available at best competitive rates in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Quetta, Multan, and all over Pakistan.