Zepoxy Glass Cast Plus Low Viscosity Slow Setting Deep Casting Epoxy in Pakistan

Zepoxy Glass Cast Plus Low Viscosity Slow Setting Deep Casting Epoxy in Pakistan

Packing

1.44 KG Set
Part A: 1 KG
Part B: 440g

Zepoxy Glass Cast Plus is a retarded clear epoxy casting system, which offers a long open time for precise article placement and complete bubble removal. It has inbuilt UV inhibitors as well as excellent visual properties. It also avoids high exothermic reaction and the resulting shrinkage after curing.

Note 

At higher mixing quantities of 5-10 kg please ensure epoxy is poured soon after mixing and that the thickness of 25mm is not exceeded. At 40°C working time will be reduced to half so pouring should be planned accordingly.

Mixing

The mixing ratio must be accurately followed to achieve perfect results. It is not possible to change the ratio which would result in the epoxy not drying properly and lower mechanical properties. Pour the hardener first and then the resin.

The mixed components should be thoroughly mixed for 3-4 minutes to ensure an even consistency. To avoid development of bubbles slowly mix for 5-10 mins. Once the epoxy is mixed and poured gently pass warm air from a heat gun or hair dryer on slowest speed setting, this will assist in removal of any bubbles generated during mixing.

At Pakistan Power Tool keeping the pace of industry developments, we have an extensive range of Ressichem Dry Mix Mortars Premix Plasters Ressichem Building Care Maintenance Tiling Grouting Materials available at best competitive rates in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Quetta, Multan, and all over Pakistan.